Pneumatic Valves.

Lamouroux now proposes two types of valves: the VP2732I valve and the VP3463N valve. These two pneumatic valves are capable of controlling the input of cold or hot water perfectly, with a higher output than an electric valve and greater reliability at the closure. These valves are controlled via a control rod.

Control rod (2 and 4 places)

LAMOUROUX uses mini control distributors made of brass, with the body mounted on anodized aluminium rods. The mini distributors are powered in 24 V and consume 1.5 W. They can withstand pressure ranging from 0 to 10 bars. Pre-wired supply with 3 conductors, cable length 4 m.

Features of the VP2732I pneumatic valve

Pneumatic valve controlled by a piston head, 32 mm in diameter, threaded stainless steel body 3/4. Flowthrough diameter 20 mm (allowing a Kv output of 6.5m3/h).

Capacities and performances

The VP2732I valve offers interesting capacities: the control pressure is 4 to 10 bars. Fluid temperature can range from - 10° to + 180° C, and the valve can withstand differential water pressure of between 0 and 10 bars. Higher output than an electric valve (for the same diameter). Perfect tightness, preventing any risk of mixing the hot and cold networks. A turning air inlet connector 2.7x4. A control head for each piston, with 360° orientation. An anti-pressure shock system (use: arrival below the valve). A high-performance packing assembly requiring no maintenance. An optical position indicator.